Isolation and crystal structure of a water-soluble iridium hydride: a robust and highly active catalyst for acid-catalyzed transfer hydrogenations of carbonyl compounds in acidic media

This paper reports the isolation and structural determination of a water-soluble hydride complex [Cp*Ir(III)(bpy)H](+) (1, Cp* = eta(5)-C(5)Me(5), bpy = 2,2'-bipyridine) that serves as a robust and highly active catalyst for acid-catalyzed transfer hydrogenations of carbonyl compounds at pH 2.0-3.0 at 70 degrees C. The catalyst 1 was synthesized from the reaction of a precatalyst [Cp*Ir(III)(bpy)(OH(2))](2+) (2) with hydrogen donors HCOOX (X = H or Na) in H(2)O under controlled conditions (2.0 < pH < 6.0, 25 degrees C) which avoid protonation of the hydrido ligand of 1 below pH ca. 1.0 and deprotonation of the aqua ligand of 2 above pH ca. 6.0 (pK(a) value of 2 = 6.6). X-ray analysis shows that complex 1 adopts a distorted octahedral geometry with the Ir atom coordinated by one eta(5)-Cp*, one bidentate bpy, and one terminal hydrido ligand that occupies a bond position. The isolation of 1 allowed us to investigate the robust ability of 1 in acidic media and reducing ability of 1 in the reaction with carbonyl compounds under both stoichiometric and catalytic conditions. The rate of the acid-catalyzed transfer hydrogenation is drastically dependent on pH of the solution, reaction temperature, and concentration of HCOOH. The effect of pH on the rate of the transfer hydrogenation is rationalized by the pH-dependent formation of 1 and activation process of the carbonyl compounds by protons. High turnover frequencies of the acid-catalyzed transfer hydrogenations at pH 2.0-3.0 are ascribed not only to nucleophilicity of 1 toward the carbonyl groups activated by protons but also to a protonic character of the hydrido ligand of 1 that inhibits the protonation of the hydrido ligand.     

Mono- and oligosaccharide sensing by phenylboronic acid-appended 5,15-bis(diarylethynyl)porphyrin complexes

Porphyrin derivatives bearing a pair of boronic acid groups (1, 1·Zn, and 1·Cu) were designed and synthesized from 2 to construct a saccharide sensing system. Compounds 1, 1·Zn, and 1·Cu have a diethynyl porphyrin rotational axis, which is expected to act as a saccharide-binding modulator. Saccharide binding studies were conducted by UV-vis, fluorescence, and circular dichroism (CD) spectroscopies. In a water-methanol 1:1 (v/v) mixed solvent, we have found that 1·Zn can bind mono- and oligosaccharides including Lewis oligosaccharides to produce 1:1 host-saccharide complexes with the association constants of 10²−10³ M⁻¹ range. This paper thus demonstrates a new principle to design a boronic acid-based saccharide receptor.     

A new-type photoreaction of a carbonyl compound: Part 2. Photoinduced ω-bond dissociation in p-halomethylbenzophenone studied by time-resolved EPR technique and laser flash photolysis

Photodissociation of the carbon-X (X = Br and Cl) bonds in p-bromo- and p-chloromethylbenzophenone (BMBP and CMBP) in solution were investigated by time-resolved EPR and laser flash photolysis techniques. BMBP and CMBP were found to undergo ω-bond cleavage to yield the p-benzoylbenzyl radical (BBR) at 295 K, and the quantum yields (Φ_BBR) were determined. The CIDEP signal originated from BBR formed upon decomposition of CMBP was obtained while that for BMBP was absent. By using triplet sensitization of acetone, the efficiencies (_BBR) of the CX bond fission in the triplet states of BMBP and CMBP were determined. The agreement between the Φ_BBR and _BBR values for CMBP indicates that the CCl bond dissociation occurs only in the triplet state. In contrast to CMBP, the cleavage of the CBr bond in BMBP upon direct excitation was concluded to be the event only in the excited singlet state without triplet formation, whereas the triplet state was also reactive for ω-bond dissociation. The rate of CBr bond dissociation seemed to be greater than that of intersystem crossing from the S₁ to the T₁ state. Schematic energy diagrams of the excited states of BMBP and CMBP were shown, and the reaction profiles were discussed from the viewpoint of the CX bond enthalpies.     

WAVELENGTH-DEPENDENT PROPERTIES OF PHOTOTAXIS IN LARVAE OF Bombyx mori

Phototactic responses of newly hatched silkworm larvae to monochromatic lights and their mixtures were measured to determine wavelength-dependent properties. Each fluence rate-response curve for a monochromatic light was composed of a log-linearly increasing part, a plateau and a decreasing part. Curves were classified into two groups according to the slopes of the linear parts: responses to UV-blue light (364-482 nm) and responses to green-red light (513-681 nm). Different plateau values were found for both groups. The action spectrum had its maximum at 557 nm and showed another large value at about 364 nm, and its minimum was at 447 nm. When green-orange lights (540-577 nm) were added to 557 nm, the silkworms were attracted more by the mixed lights than by the 557 nm component light only. Mixed lights of UV (364 nm) and blue (447 nm) attracted the silkworms more than either component. The magnitude of the response decreased remarkably when green light was mixed with U V or blue light. We conclude that the silkworm possesses colour vision and responds differently to green-red lights (≥ 513 nm) from UV-blue lights (≲ 482 nm).     

Convergent synthesis of the ABCDE ring fragment of ciguatoxins

Synthesis of the ABCDE ring fragment of ciguatoxins has been achieved in a highly stereocontrolled and convergent manner via the B-alkyl Suzuki-Miyaura coupling-based approach.     

De novo design, synthesis, and function of semiartificial myoglobin conjugated with coiled-coil two-alpha-helix peptides

The introduction of a flavin chromophore on the myoglobin (Mb) surface and an effective electron-transfer (ET) reaction through the flavin were successfully achieved by utilizing the self-assembly of heterostranded coiled-coil peptides. We have prepared a semiartificial Mb, named Mb-1alphaK, in which an amphiphilic and cationic alpha-helix peptide is conjugated at the heme propionate (Heme-1alphaK). Heme-1alphaK has a covalently bound iron-protoporphyrin IX (heme) at the N terminus of a 1alphaK peptide sequence. This sequence was designed to form a heterostranded coiled-coil in the presence of a counterpart amphiphilic and anionic 1alphaE peptide sequence in a parallel orientation. Two peptides, Fla(1)-1alphaE and Fla(31)-1alphaE, both incorporating a 10-methylisoalloxazine moiety as an artificial flavin molecule, were also prepared (Fla=2-[7-(10-methyl)isoalloxazinyl]-2-oxoethyl). Heme-1alphaK was successfully inserted into apomyoglobin to give Mb-1alphaK. Mb-1alphaK recognized the flavin-modified peptides and a two-alpha-helix structure was formed. In addition, an efficient ET from reduced nicotinamide adenine dinucleotide to the heme center through the flavin unit was observed. The ET rate was faster in the presence of Fla(1)-1alphaE than in the presence of Fla(31)-1alphaE or the equivalent molecule that has no peptide chain. These results demonstrate that the introduction of a functional chromophore on the Mb surface can be achieved by using specific peptide-peptide interactions. Moreover, the dependence of the ET rate on the position of the flavin indicated that the distance between the heme active site and the flavin chromophore was regulated by the three-dimensional structure of the designed polypeptide.     

Generation of alkoxycarbenium ion pools from thioacetals and applications to glycosylation chemistry

[reaction: see text] Alkoxycarbenium ions have been generated and accumulated as "cation pools" by the low-temperature electrochemical oxidation of alpha-phenylthioethers. Although an unsuccessful attempt to accumulate glycosyl cations was made, a one-pot method for electrochemical glycosylation, which involves anodic oxidation of thioglycosides to generate glycosyl cation equivalents followed by their reactions with glycosyl acceptors, has been developed.     

Enantioselective formation of a dynamic hydrogen-bonded assembly based on the chiral memory concept

In this paper, we report the enantioselective formation of a dynamic noncovalent double rosette assembly 1a(3).(CYA)(6) composed of three 2-pyridylcalix[4]arene dimelamines (1a) and six butylcyanuric acid molecules (BuCYA). The six 2-pyridyl functionalities of the assembly interact stereoselectively with chiral dicarboxylic acids 3a-e via two-point hydrogen-bonding interactions. One of the two enantiomeric assemblies (P- or M-) 1a(3).(CYA)(6) is formed in excess as the result of the complexation of the chiral diacids, resulting in formation of optically active assemblies. The complexations with dibenzoly tartaric acids D-3a and L-3a (3 equivalent), respectively, leading to the formation of diastereomeric assemblies (P)-1a(3).(BuCYA)(6).(D-3a)(3) and (M)-1a(3).(BuCYA)(6).(L-3a)(3) with 90% diastereomeric excess. The diastereomeric excess in (M)-1a(3).(BuCYA)(6).(L-3a)(3) is "memorized" when L-3a is removed by precipitation with ethlylenediamine (EDA). The assembly (M)-1a(3).(BuCYA)(6) is still optically active (90% enantiomeric excess), although none of its individual components are chiral. (M)-1a(3).(BuCYA)(6) has a high kinetic stability toward racemization (E(a) = 119 kJ mol(-)(1), half-life of (M)-1a(3).(BuCYA)(6) is ca. 1 week at 20 degrees C).     

Synthesis of the common left-half part of pectenotoxins

The common left-half [C31-C33(OC1-C7)-C40] part of pectenotoxins has been synthesized convergently from the C31-C35, C36-C40, and C1-C7 parts. The C31-C35 part, prepared via a new route shorter than our previous route, was coupled with the C36-C40 part through reductive lithiation and addition reactions to give an adduct stereoselectively, which was converted to a cyclic acetal corresponding to the C31-C40 part. The left-half was synthesized by a three-step process including esterification of the C31-C40 part with the C1-C7 part.